M-Engineering PDK2 Calibration for 992.1 Carrera Base / S / GTS / Dakar
PDK Control units are to be shipped to M-Engineering's facility!
M-Engineering is the first to market again for the 992 Carrera platform presenting our new suite of calibrations for the PDK2 gearbox!
With the 992 Carrera platform reaching new heights in torque and power levels, it has become clear that PDK flashing is required to go even further to prevent clutch slippage and hold more power down. Even with stock hardware, flashing the PDK2 will provide time improvements and an enhanced driving experience.
PDK2 Tuning Includes:
- Improved and optimized paddle to shift times in manual mode
- Adjusted clutch pressures and higher max clutch clamping forces to hold more torque
- Changes to virtual gears
- Increase in allowed torque from the engine
- Improved times at the track and drag strip
- Removal of "creep" when letting of the brake from a standstill
- For those with bigger turbos, we will also add higher auto-shift RPMs.
**PDK2 Tuning is only available for cars equipped with M-Tuner. It is not compatible with other ECU tunes**
*The PDK2 module must be removed from the vehicle and sent to M-Engineering for flashing. It is located under the carpet on the rear shelf behind the driver's seat.*
PDK2 Removal Instructions HERE.
When sending in your PDK module, please let us know your current M-Tuner ECU calibration flashed to the car as well as any mods and how you are planning to use the car. We will design and flash an OTS PDK2 calibration to suit those needs. If you don't have M-Tuner yet, you can purchase it here.
If there are ever any software updates and new PDK2 calibrations, updates are free for the original purchaser of the tune. Buyer just needs to pay for associated shipping costs.
Disclaimer: You accept responsibility and risks of any tunes and added features by M-Engineering. If you are not the end user of the car, you will be solely responsible for notifying the purchaser and/or customer they also accept the responsibility and risks of these and M-Engineering is not liable. M-Engineering is also not liable for voided warranties due to installation of our products.
PDK Control units are to be shipped to M-Engineering's facility!
M-Engineering is the first to market again for the 992 Carrera platform presenting our new suite of calibrations for the PDK2 gearbox!
With the 992 Carrera platform reaching new heights in torque and power levels, it has become clear that PDK flashing is required to go even further to prevent clutch slippage and hold more power down. Even with stock hardware, flashing the PDK2 will provide time improvements and an enhanced driving experience.
PDK2 Tuning Includes:
- Improved and optimized paddle to shift times in manual mode
- Adjusted clutch pressures and higher max clutch clamping forces to hold more torque
- Changes to virtual gears
- Increase in allowed torque from the engine
- Improved times at the track and drag strip
- Removal of "creep" when letting of the brake from a standstill
- For those with bigger turbos, we will also add higher auto-shift RPMs.
**PDK2 Tuning is only available for cars equipped with M-Tuner. It is not compatible with other ECU tunes**
*The PDK2 module must be removed from the vehicle and sent to M-Engineering for flashing. It is located under the carpet on the rear shelf behind the driver's seat.*
PDK2 Removal Instructions HERE.
When sending in your PDK module, please let us know your current M-Tuner ECU calibration flashed to the car as well as any mods and how you are planning to use the car. We will design and flash an OTS PDK2 calibration to suit those needs. If you don't have M-Tuner yet, you can purchase it here.
If there are ever any software updates and new PDK2 calibrations, updates are free for the original purchaser of the tune. Buyer just needs to pay for associated shipping costs.
Disclaimer: You accept responsibility and risks of any tunes and added features by M-Engineering. If you are not the end user of the car, you will be solely responsible for notifying the purchaser and/or customer they also accept the responsibility and risks of these and M-Engineering is not liable. M-Engineering is also not liable for voided warranties due to installation of our products.